Specification support from Hyupshin
Use the dimensions and RFQ notes below to check the required standard, size range, pressure rating, material grade and certificate needs before sending an inquiry.
EN 1092-1 detail
EN 1092-1 Type 13 Threaded Flanges
EN 1092-1 Type 13 threaded flange dimensions and RFQ notes for purchasing review.
EN 1092-1
ASME B16.5
Suministro PN
Documentos trazables
EN 1092-1Main product range
ANSI B16.5Class-rated American standard
PED / AD 2000 / UKCACertificate references
Importers & stockistsRepeat supply cooperation
European shipment markets
Flange supply support for European importers and distributors.
Hyupshin supports EN 1092-1, DIN, BS 4504, UNI and project-standard flange inquiries for buyers in United Kingdom, Germany, Hungary, Poland, Czech Republic, Croatia, Italy, Serbia, Slovakia, France, Norway, Portugal, Spain, Netherlands, Austria, Ireland, Albania, Bulgaria, Belgium, Greece.
RFQ preparation
Information that makes European standard flange quotation faster.
Standard
EN 1092-1, ANSI / ASME B16.5, DIN, BS 4504, UNI or project drawing.
Flange details
Type, DN size, PN rating, facing, bore and drawing notes.
Material
Carbon steel, low-temperature steel, stainless steel or project grade.
Documents
EN 10204 3.1, inspection, marking, packing and certificate needs.
Supply notes
EN 1092-1 Type 13 Threaded Flanges for European buyers
RFQ confirmation points
Please confirm standard number, flange type, nominal size, pressure rating, material grade, facing, quantity, certificate requirement and any project drawing before quotation.
Product scope
Threaded flange Type 13 can be quoted in carbon steel, stainless steel or project material grades when the order specification, dimensions and certificate requirements are confirmed.
European buyer focus
Order details to confirm before production
Threaded flange inquiries are reviewed against piping service, installation position and required facing.
State PN rating clearly, especially PN10, PN16, PN25 or PN40 for regular European distributor orders.
Common RFQs include carbon steel, low-temperature steel and stainless steel grades. Attach the project grade when it differs from regular stock items.
Confirm RF, FF, RTJ, galvanized finish, black paint, anti-rust oil or project-specific surface protection before quotation.
Mention EN 10204 3.1, PED, AD 2000, UKCA, PMI, NDT or third-party inspection requirements in the RFQ.
For European shipment, state pallet, wooden case, label, marking and mixed-size packing requirements early.
Procurement guidance
EN 1092-1 Type 13 Threaded Flanges quotation notes
EN 1092-1 Type 13 Threaded Flanges buying notes
EN 1092-1 flange orders are usually compared by type number, DN size, PN rating, material grade and facing. European buyers often need a practical quotation format that separates Type 01 plate flanges, Type 05 blind flanges, Type 11 weld neck flanges and other type numbers instead of mixing them into one unclear line item.
For distributor stock and repeat purchasing, PN10 and PN16 are common, while PN25, PN40 and higher ratings are usually reviewed as project requirements. A useful RFQ should state whether the order is for stock replenishment, plant maintenance, a pressure piping project or a drawing-based replacement item.
Threaded flange details
For threaded flanges, thread form, thread standard, pressure rating and material grade should be identified. Buyers should also mention whether welding is not permitted or whether the order is for maintenance replacement.
For European buyers, the quotation is stronger when documentation requirements are stated at the beginning: EN 10204 3.1 certificate, PED or AD 2000 references, UKCA notes, third-party inspection, PMI, NDT, marking photos or packing photos. This avoids revising the price after the technical review.
How to prepare the RFQ
Hyupshin recommends sending the RFQ as a table when several sizes are involved. Separate each standard, type, pressure rating and material grade into its own line, then add quantity, destination port and required delivery time. This format is easier for European importers, distributors and project suppliers to compare and repeat in future orders.
If the order is urgent, mark which sizes are needed first and whether partial shipment is acceptable. For repeat distributors, previous purchase records or customer part numbers can be added to the message field so the specification can be matched more quickly.
Reference scope
Common order references
| Standard / Type | Product | Typical scope |
|---|---|---|
| Threaded flange Type 13 | Product type | Dimensions and specification tables below |
| Documents | Material certificate | EN 10204 3.1 by request |
| Order control | Drawing / standard edition | Confirm before production |
Datos de producto
Tablas de dimensiones y especificaciones
EN 1092-1 TYPE 13 PN6 THREADED FLANGE
| Rated Diameter | Flange | Neck | Raised face | Screws | Weight (7,85 Kg/dm3) | ||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| d1 | Thread | k | D | b | h1 | d3 | d4 | f | d2 | Thread | Bolt holes | KG | |
| 15 | 21,3 | R 1/2" | 55 | 80 | 12 | 20 | 30,0 | 40,0 | 2,0 | 11 | M10 | 4 | 0,373 |
| 20 | 26,9 | R 3/4" | 65 | 90 | 14 | 24 | 40,0 | 50,0 | 2,0 | 11 | M10 | 4 | 0,584 |
| 25 | 33,7 | R 1" | 75 | 100 | 14 | 24 | 50,0 | 60,0 | 2,0 | 11 | M10 | 4 | 0,729 |
| 32 | 42,4 | R 1-1/4" | 90 | 120 | 14 | 26 | 60,0 | 70,0 | 2,0 | 14 | M12 | 4 | 1,040 |
| 40 | 48,3 | R 1-1/2" | 100 | 130 | 14 | 26 | 70,0 | 80,0 | 3,0 | 14 | M12 | 4 | 1,200 |
| 50 | 60,3 | R 2" | 110 | 140 | 14 | 28 | 80,0 | 90,0 | 3,0 | 14 | M12 | 4 | 1,340 |
| 65 | 76,1 | R 2-1/2" | 130 | 160 | 14 | 32 | 100,0 | 110,0 | 3,0 | 14 | M12 | 4 | 1,830 |
| 80 | 88,9 | R 3" | 150 | 190 | 16 | 34 | 110,0 | 128,0 | 3,0 | 18 | M16 | 4 | 2,750 |
| 100 | 114,3 | R 4" | 170 | 210 | 16 | 40 | 130,0 | 148,0 | 3,0 | 18 | M16 | 4 | 3,010 |
| 125 | 139,7 | R 5" | 200 | 240 | 18 | 44 | 160,0 | 178,0 | 3,0 | 18 | M16 | 8 | 4,300 |
| 150 | 168,3 | R 6" | 225 | 265 | 18 | 44 | 185,0 | 202,0 | 3,0 | 18 | M16 | 8 | 4,630 |
| 1. SURFACE FINISH FACING TYPES A, B1, B2 etc | |||||||||||||
| 2. FLANGE MARKING: LOGO EN 1092-1 / 13 / DN100 / PN6 / P245GH / HEAT NUMBER | |||||||||||||
EN 1092-1 TYPE 13 PN16 THREADED FLANGE
| Rated Diameter | Flange | Neck | Raised face | Screws | Weight (7,85 Kg/dm3) | ||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| d1 | Thread | k | D | b | h1 | d3 | d4 | f | d2 | Thread | Bolt holes | KG | |
| 15 | 21,3 | R 1/2" | 65 | 95 | 16 | 22 | 35,0 | 45,0 | 2,0 | 14 | M12 | 4 | 0,722 |
| 20 | 26,9 | R 3/4" | 75 | 105 | 18 | 26 | 45,0 | 58,0 | 2,0 | 14 | M12 | 4 | 1,040 |
| 25 | 33,7 | R 1" | 85 | 115 | 18 | 28 | 52,0 | 68,0 | 2,0 | 14 | M12 | 4 | 1,250 |
| 32 | 42,4 | R 1-1/4" | 100 | 140 | 18 | 30 | 60,0 | 78,0 | 2,0 | 18 | M16 | 4 | 1,810 |
| 40 | 48,3 | R 1-1/2" | 110 | 150 | 18 | 32 | 70,0 | 88,0 | 3,0 | 18 | M16 | 4 | 2,060 |
| 50 | 60,3 | R 2" | 125 | 165 | 18 | 28 | 84,0 | 102,0 | 3,0 | 18 | M16 | 4 | 2,390 |
| 65 | 76,1 | R 2-1/2" | 145 | 185 | 18 | 32 | 104,0 | 122,0 | 3,0 | 18 | M16 | 4 | 2,970 |
| 80 | 88,9 | R 3" | 160 | 200 | 20 | 34 | 118,0 | 138,0 | 3,0 | 18 | M16 | 8 | 3,780 |
| 100 | 114,3 | R 4" | 180 | 220 | 20 | 40 | 140,0 | 158,0 | 3,0 | 18 | M16 | 8 | 4,380 |
| 125 | 139,7 | R 5" | 210 | 250 | 22 | 44 | 168,0 | 188,0 | 3,0 | 18 | M16 | 8 | 6,070 |
| 150 | 168,3 | R 6" | 240 | 285 | 22 | 44 | 195,0 | 212,0 | 3,0 | 22 | M20 | 8 | 7,240 |
| 1. SURFACE FINISH FACING TYPES A, B1, B2 etc | |||||||||||||
| 2. FLANGE MARKING: LOGO EN 1092-1 / 13 / DN100 / PN16 / P245GH / HEAT NUMBER | |||||||||||||
Use estas tablas para preparar la RFQ. La fabricacion final debe confirmarse contra la edicion de la norma, plano, material y certificado requerido.
Send this product for quotation
Enviar consulta
EN 1092-1 Type 13 Threaded Flanges RFQ support
Send the standard, DN size, PN rating, material grade, facing, quantity, certificate requirement and any project drawing. Hyupshin will check the specification before quotation.
Preparacion de RFQ
Contactar ventas