RFQ control
Provide NPS size, class, material, stub-end details if available, quantity and certificate requirements.
B16.5 flange type
ANSI / ASME B16.5 Lap Joint Flanges
Lap joint flanges are reviewed together with stub-end requirements, class rating, material, size and facing details.
EN 1092-1
ASME B16.5
Suministro PN
Documentos trazables
EN 1092-1Main product range
ANSI B16.5Class-rated American standard
PED / AD 2000 / UKCACertificate references
Importers & stockistsRepeat supply cooperation
European shipment markets
Flange supply support for European importers and distributors.
Hyupshin supports EN 1092-1, DIN, BS 4504, UNI and project-standard flange inquiries for buyers in United Kingdom, Germany, Hungary, Poland, Czech Republic, Croatia, Italy, Serbia, Slovakia, France, Norway, Portugal, Spain, Netherlands, Austria, Ireland, Albania, Bulgaria, Belgium, Greece.
RFQ preparation
Information that makes European standard flange quotation faster.
Standard
EN 1092-1, ANSI / ASME B16.5, DIN, BS 4504, UNI or project drawing.
Flange details
Type, DN size, PN rating, facing, bore and drawing notes.
Material
Carbon steel, low-temperature steel, stainless steel or project grade.
Documents
EN 10204 3.1, inspection, marking, packing and certificate needs.
Paginas relacionadas
Paginas de bridas para Europa
ASME B16.5 Plate Flange
Plate / ring flange RF or FF inquiries for Class 150, 300 and 600 orders.
ASME B16.5 Weld Neck FlangeWNRF, WNFF and RTJ weld neck flange RFQs for pressure piping projects.
ASME B16.5 Slip On FlangeSORF and SOFF slip-on flange references for European buyers ordering American standard flanges.
ASME B16.5 Blind FlangeBlind / blank flange supply with RF, FF or RTJ facing requirements.
ASME B16.5 Class 150 / 300Common Class 150 and Class 300 quotation range.
ASME B16.5 MaterialsASTM A105, A350 LF2, A182 stainless steel and certificate notes.
Supply notes
ANSI / ASME B16.5 Lap Joint Flanges for European buyers
Buyer note
Because lap joint assemblies can vary by stub-end design, drawings or previous purchase records are useful for confirmation.
European buyer focus
Order details to confirm before production
Lap Joint / Loose flange inquiries are reviewed against piping service, installation position and required facing.
State Class 150, 300, 400, 600, 900, 1500 or 2500 with facing and bore details.
Common RFQs include carbon steel, low-temperature steel and stainless steel grades. Attach the project grade when it differs from regular stock items.
Confirm RF, FF, RTJ, galvanized finish, black paint, anti-rust oil or project-specific surface protection before quotation.
Mention EN 10204 3.1, PED, AD 2000, UKCA, PMI, NDT or third-party inspection requirements in the RFQ.
For European shipment, state pallet, wooden case, label, marking and mixed-size packing requirements early.
Procurement guidance
ANSI / ASME B16.5 Lap Joint Flanges quotation notes
ANSI / ASME B16.5 Lap Joint Flanges buying notes
ANSI / ASME B16.5 flanges purchased by European customers should be checked by NPS size, Class rating, flange facing, pipe schedule and bore requirement. These orders often appear in oil, gas, chemical, energy and EPC projects where American standard flanges are purchased together with EN or DIN items.
For Class 150 and Class 300 inquiries, buyers usually focus on fast comparison and clear material options. For Class 600, 900, 1500 and 2500, the RFQ should be treated as a project review with closer attention to facing, wall thickness, pressure service, inspection and certificate wording.
Lap Joint / Loose flange details
For lap joint or loose flanges, the matching stub-end or collar requirement should be confirmed. The buyer should state whether the loose flange is ordered alone or as part of an assembly.
For European buyers, the quotation is stronger when documentation requirements are stated at the beginning: EN 10204 3.1 certificate, PED or AD 2000 references, UKCA notes, third-party inspection, PMI, NDT, marking photos or packing photos. This avoids revising the price after the technical review.
How to prepare the RFQ
Hyupshin recommends sending the RFQ as a table when several sizes are involved. Separate each standard, type, pressure rating and material grade into its own line, then add quantity, destination port and required delivery time. This format is easier for European importers, distributors and project suppliers to compare and repeat in future orders.
If the order is urgent, mark which sizes are needed first and whether partial shipment is acceptable. For repeat distributors, previous purchase records or customer part numbers can be added to the message field so the specification can be matched more quickly.
Reference scope
Common order references
| Standard / Type | Product | Typical scope |
|---|---|---|
| Type | Lap joint flange | Used with stub end |
| Class rating | 150 to 2500 | By ASME B16.5 order scope |
| Documents | Material certificate | By order requirement |
Datos de producto
Tablas de dimensiones y especificaciones
ANSI / ASME B16.5 Class 150 lap joint flange dimensions
| NPS | OD in | Thickness in | Bolt circle in | Holes | Hole dia. in | Approx. lb |
|---|---|---|---|---|---|---|
| 1/2" | 3.5 | 0.44 | 2.38 | 4 | 0.62 | 1 |
| 3/4" | 3.88 | 0.5 | 2.75 | 4 | 0.62 | 2 |
| 1" | 4.25 | 0.56 | 3.12 | 4 | 0.62 | 2 |
| 1 1/2" | 5 | 0.69 | 3.88 | 4 | 0.62 | 3 |
| 2" | 6 | 0.75 | 4.75 | 4 | 0.75 | 5 |
| 3" | 7.5 | 0.94 | 6 | 4 | 0.75 | 8 |
| 4" | 9 | 0.94 | 7.5 | 8 | 0.75 | 13 |
| 6" | 11 | 1 | 9.5 | 8 | 0.88 | 19 |
| 8" | 13.5 | 1.12 | 11.75 | 8 | 0.88 | 30 |
| 10" | 16 | 1.19 | 14.25 | 12 | 1 | 43 |
| 12" | 19 | 1.25 | 17 | 12 | 1 | 64 |
| 16" | 23.5 | 1.44 | 21.25 | 16 | 1.12 | 140 |
| 20" | 27.5 | 1.69 | 25 | 20 | 1.25 | 195 |
| 24" | 32 | 1.88 | 29.5 | 20 | 1.38 | 275 |
ANSI / ASME B16.5 Class 300 lap joint flange dimensions
| NPS | OD in | Thickness in | Bolt circle in | Holes | Hole dia. in | Approx. lb |
|---|---|---|---|---|---|---|
| 1/2" | 3.75 | 0.56 | 2.62 | 4 | 0.62 | 2 |
| 3/4" | 4.62 | 0.62 | 3.25 | 4 | 0.75 | 3 |
| 1" | 4.88 | 0.69 | 3.5 | 4 | 0.75 | 3 |
| 1 1/2" | 6.12 | 0.81 | 4.5 | 4 | 0.88 | 6 |
| 2" | 6.5 | 0.88 | 5 | 8 | 0.75 | 7 |
| 3" | 8.25 | 1.12 | 6.62 | 8 | 0.88 | 13 |
| 4" | 10 | 1.25 | 7.88 | 8 | 0.88 | 22 |
| 6" | 12.5 | 1.44 | 10.62 | 12 | 0.88 | 39 |
| 8" | 15 | 1.62 | 13 | 12 | 1 | 58 |
| 10" | 17.5 | 1.88 | 15.25 | 16 | 1.12 | 91 |
| 12" | 20.5 | 2 | 17.75 | 16 | 1.25 | 140 |
| 16" | 25.5 | 2.25 | 22.5 | 20 | 1.38 | 250 |
| 20" | 30.5 | 2.5 | 27 | 24 | 1.38 | 370 |
| 24" | 36 | 2.75 | 32 | 24 | 1.62 | 550 |
ANSI / ASME B16.5 Class 600 lap joint flange dimensions
| NPS | OD in | Thickness in | Bolt circle in | Holes | Hole dia. in | Approx. lb |
|---|---|---|---|---|---|---|
| 1/2" | 3.75 | 0.56 | 2.62 | 4 | 0.62 | 2 |
| 3/4" | 4.62 | 0.62 | 3.25 | 4 | 0.75 | 3 |
| 1" | 4.88 | 0.69 | 3.5 | 4 | 0.75 | 4 |
| 1 1/2" | 6.12 | 0.88 | 4.5 | 4 | 0.88 | 7 |
| 2" | 6.5 | 1 | 5 | 8 | 0.75 | 9 |
| 3" | 8.25 | 1.25 | 6.62 | 8 | 0.88 | 15 |
| 4" | 10.75 | 1.5 | 8.5 | 8 | 1 | 36 |
| 6" | 14 | 1.88 | 11.5 | 12 | 1.12 | 78 |
| 8" | 16.5 | 2.19 | 13.75 | 12 | 1.25 | 110 |
| 10" | 20 | 2.5 | 17 | 16 | 1.38 | 170 |
| 12" | 22 | 2.62 | 19.25 | 20 | 1.38 | 200 |
| 16" | 27 | 3 | 23.75 | 20 | 1.62 | 365 |
| 20" | 32 | 3.5 | 28.5 | 24 | 1.75 | 570 |
| 24" | 37 | 4 | 33 | 24 | 2 | 810 |
Use estas tablas para preparar la RFQ. La fabricacion final debe confirmarse contra la edicion de la norma, plano, material y certificado requerido.
Send this product for quotation
Enviar consulta
ANSI / ASME B16.5 Lap Joint Flanges RFQ support
Send the standard, DN size, PN rating, material grade, facing, quantity, certificate requirement and any project drawing. Hyupshin will check the specification before quotation.
Preparacion de RFQ
Contactar ventas