Revue pour achats europeens
Les demandes ANSI_LAP_JOINT sont revues selon edition de norme, type de bride, pression, matiere, facing, quantite et documents requis.
ANSI_LAP_JOINT - fourniture europeenne
Brides ANSI_LAP_JOINT pour acheteurs europeens
Reference pratique pour les acheteurs europeens qui preparent des demandes ANSI_LAP_JOINT avec norme, type, dimension, pression, matiere et certificat clairement indiques.
EN 1092-1
ASME B16.5
Fourniture PN
Documents tracables
EN 1092-1Main product range
ANSI B16.5Class-rated American standard
PED / AD 2000 / UKCACertificate references
Importers & stockistsRepeat supply cooperation
Supply notes
Brides ANSI_LAP_JOINT pour acheteurs europeens for European buyers
Donnees a confirmer
Avant chiffrage, confirmez dimension, pression, matiere, facing, marquage, emballage, destination et tout plan joint.
Reference scope
Common order references
| Standard / Type | Product | Typical scope |
|---|---|---|
| Type | Lap joint flange | Used with stub end |
| Class rating | 150 to 2500 | By ASME B16.5 order scope |
| Documents | Material certificate | By order requirement |
Donnees produit
Tableaux dimensionnels et specifications
ANSI / ASME B16.5 Class 150 lap joint flange dimensions
| NPS | OD in | Thickness in | Bolt circle in | Holes | Hole dia. in | Approx. lb |
|---|---|---|---|---|---|---|
| 1/2" | 3.5 | 0.44 | 2.38 | 4 | 0.62 | 1 |
| 3/4" | 3.88 | 0.5 | 2.75 | 4 | 0.62 | 2 |
| 1" | 4.25 | 0.56 | 3.12 | 4 | 0.62 | 2 |
| 1 1/2" | 5 | 0.69 | 3.88 | 4 | 0.62 | 3 |
| 2" | 6 | 0.75 | 4.75 | 4 | 0.75 | 5 |
| 3" | 7.5 | 0.94 | 6 | 4 | 0.75 | 8 |
| 4" | 9 | 0.94 | 7.5 | 8 | 0.75 | 13 |
| 6" | 11 | 1 | 9.5 | 8 | 0.88 | 19 |
| 8" | 13.5 | 1.12 | 11.75 | 8 | 0.88 | 30 |
| 10" | 16 | 1.19 | 14.25 | 12 | 1 | 43 |
| 12" | 19 | 1.25 | 17 | 12 | 1 | 64 |
| 16" | 23.5 | 1.44 | 21.25 | 16 | 1.12 | 140 |
| 20" | 27.5 | 1.69 | 25 | 20 | 1.25 | 195 |
| 24" | 32 | 1.88 | 29.5 | 20 | 1.38 | 275 |
ANSI / ASME B16.5 Class 300 lap joint flange dimensions
| NPS | OD in | Thickness in | Bolt circle in | Holes | Hole dia. in | Approx. lb |
|---|---|---|---|---|---|---|
| 1/2" | 3.75 | 0.56 | 2.62 | 4 | 0.62 | 2 |
| 3/4" | 4.62 | 0.62 | 3.25 | 4 | 0.75 | 3 |
| 1" | 4.88 | 0.69 | 3.5 | 4 | 0.75 | 3 |
| 1 1/2" | 6.12 | 0.81 | 4.5 | 4 | 0.88 | 6 |
| 2" | 6.5 | 0.88 | 5 | 8 | 0.75 | 7 |
| 3" | 8.25 | 1.12 | 6.62 | 8 | 0.88 | 13 |
| 4" | 10 | 1.25 | 7.88 | 8 | 0.88 | 22 |
| 6" | 12.5 | 1.44 | 10.62 | 12 | 0.88 | 39 |
| 8" | 15 | 1.62 | 13 | 12 | 1 | 58 |
| 10" | 17.5 | 1.88 | 15.25 | 16 | 1.12 | 91 |
| 12" | 20.5 | 2 | 17.75 | 16 | 1.25 | 140 |
| 16" | 25.5 | 2.25 | 22.5 | 20 | 1.38 | 250 |
| 20" | 30.5 | 2.5 | 27 | 24 | 1.38 | 370 |
| 24" | 36 | 2.75 | 32 | 24 | 1.62 | 550 |
ANSI / ASME B16.5 Class 600 lap joint flange dimensions
| NPS | OD in | Thickness in | Bolt circle in | Holes | Hole dia. in | Approx. lb |
|---|---|---|---|---|---|---|
| 1/2" | 3.75 | 0.56 | 2.62 | 4 | 0.62 | 2 |
| 3/4" | 4.62 | 0.62 | 3.25 | 4 | 0.75 | 3 |
| 1" | 4.88 | 0.69 | 3.5 | 4 | 0.75 | 4 |
| 1 1/2" | 6.12 | 0.88 | 4.5 | 4 | 0.88 | 7 |
| 2" | 6.5 | 1 | 5 | 8 | 0.75 | 9 |
| 3" | 8.25 | 1.25 | 6.62 | 8 | 0.88 | 15 |
| 4" | 10.75 | 1.5 | 8.5 | 8 | 1 | 36 |
| 6" | 14 | 1.88 | 11.5 | 12 | 1.12 | 78 |
| 8" | 16.5 | 2.19 | 13.75 | 12 | 1.25 | 110 |
| 10" | 20 | 2.5 | 17 | 16 | 1.38 | 170 |
| 12" | 22 | 2.62 | 19.25 | 20 | 1.38 | 200 |
| 16" | 27 | 3 | 23.75 | 20 | 1.62 | 365 |
| 20" | 32 | 3.5 | 28.5 | 24 | 1.75 | 570 |
| 24" | 37 | 4 | 33 | 24 | 2 | 810 |
Utilisez ces tableaux pour preparer la RFQ. La fabrication finale doit etre confirmee selon norme, plan, matiere et certificat requis.
Envoyer une demande
Envoyer une demande
Brides ANSI_LAP_JOINT pour acheteurs europeens RFQ support
Envoyer une demande: norme, type, size, pressure rating, matiere, quantity, certificat and any plan.
Buyer questions
RFQ and order notes
Quelles donnees sont utiles pour chiffrer?
Envoyez norme, type, dimension, pression, matiere, quantite, destination et certificat requis.
Hyupshin peut-il revoir une commande sur plan?
Oui. Les plans ou anciennes commandes aident a confirmer dimensions, percage et tolerances.
Preparation RFQ
Contacter ventes