EN 1092-1 detail

EN 1092-1 Type 12 Slip-on Bossed Flanges

EN 1092-1 Type 12 slip-on bossed flange dimensions and RFQ notes for purchasing review.

EN 1092-1 focused ASME B16.5 supported PN-rated supply Traceable documents

Send Inquiry Certificates

Back to EN 1092-1 flanges

EN 1092-1Main product range

ANSI B16.5Class-rated American standard

PED / AD 2000 / UKCACertificate references

Importers & stockistsRepeat supply cooperation

European shipment markets

Flange supply support for European importers and distributors.

Hyupshin supports EN 1092-1, DIN, BS 4504, UNI and project-standard flange inquiries for buyers in United Kingdom, Germany, Hungary, Poland, Czech Republic, Croatia, Italy, Serbia, Slovakia, France, Norway, Portugal, Spain, Netherlands, Austria, Ireland, Albania, Bulgaria, Belgium, Greece.

United KingdomGermanyHungaryPolandCzech RepublicCroatiaItalySerbiaSlovakiaFranceNorwayPortugalSpainNetherlandsAustriaIrelandAlbaniaBulgariaBelgiumGreece

EN 1092-1 Type 12 Slip-on Bossed Flanges product reference — Product reference **EN 1092-1 Type 12 Slip-on Bossed Flanges**

Weld neck flanges for European standard projects — Weld neck flanges

Blind flanges for European distributor supply — Blind and project flanges

RFQ preparation

Information that makes European standard flange quotation faster.

Standard

EN 1092-1, ANSI / ASME B16.5, DIN, BS 4504, UNI or project drawing.

Flange details

Type, DN size, PN rating, facing, bore and drawing notes.

Material

Carbon steel, low-temperature steel, stainless steel or project grade.

Documents

EN 10204 3.1, inspection, marking, packing and certificate needs.

Supply notes

EN 1092-1 Type 12 Slip-on Bossed Flanges for European buyers

Specification support from Hyupshin

Use the dimensions and RFQ notes below to check the required standard, size range, pressure rating, material grade and certificate needs before sending an inquiry.

RFQ confirmation points

Please confirm standard number, flange type, nominal size, pressure rating, material grade, facing, quantity, certificate requirement and any project drawing before quotation.

Product scope

Slip-on bossed flange Type 12 can be quoted in carbon steel, stainless steel or project material grades when the order specification, dimensions and certificate requirements are confirmed.

European buyer focus

Order details to confirm before production

Application

EN 1092-1 flange inquiries are reviewed by standard, pressure rating and project use.

Pressure rating

State PN rating clearly, especially PN10, PN16, PN25 or PN40 for regular European distributor orders.

Material range

Common RFQs include carbon steel, low-temperature steel and stainless steel grades. Attach the project grade when it differs from regular stock items.

Facing and finish

Confirm RF, FF, RTJ, galvanized finish, black paint, anti-rust oil or project-specific surface protection before quotation.

Certificate support

Mention EN 10204 3.1, PED, AD 2000, UKCA, PMI, NDT or third-party inspection requirements in the RFQ.

Packing

For European shipment, state pallet, wooden case, label, marking and mixed-size packing requirements early.

Procurement guidance

EN 1092-1 Type 12 Slip-on Bossed Flanges quotation notes

European PN-rated purchasing

EN 1092-1 Type 12 Slip-on Bossed Flanges buying notes

EN 1092-1 flange orders are usually compared by type number, DN size, PN rating, material grade and facing. European buyers often need a practical quotation format that separates Type 01 plate flanges, Type 05 blind flanges, Type 11 weld neck flanges and other type numbers instead of mixing them into one unclear line item.

For distributor stock and repeat purchasing, PN10 and PN16 are common, while PN25, PN40 and higher ratings are usually reviewed as project requirements. A useful RFQ should state whether the order is for stock replenishment, plant maintenance, a pressure piping project or a drawing-based replacement item.

Type confirmation

Flange detail review

For this flange type, the safest quotation route is to send the standard, size range, pressure rating, material grade, facing, quantity and any drawing notes together in one RFQ. This gives the sales and technical team enough information to check the order before pricing.

For European buyers, the quotation is stronger when documentation requirements are stated at the beginning: EN 10204 3.1 certificate, PED or AD 2000 references, UKCA notes, third-party inspection, PMI, NDT, marking photos or packing photos. This avoids revising the price after the technical review.

Importer cooperation

How to prepare the RFQ

Hyupshin recommends sending the RFQ as a table when several sizes are involved. Separate each standard, type, pressure rating and material grade into its own line, then add quantity, destination port and required delivery time. This format is easier for European importers, distributors and project suppliers to compare and repeat in future orders.

If the order is urgent, mark which sizes are needed first and whether partial shipment is acceptable. For repeat distributors, previous purchase records or customer part numbers can be added to the message field so the specification can be matched more quickly.

Reference scope

Common order references

Standard / Type	Product	Typical scope
Slip-on bossed flange Type 12	Product type	Dimensions and specification tables below
Documents	Material certificate	EN 10204 3.1 by request
Order control	Drawing / standard edition	Confirm before production

Product data

Dimensions and specification tables

EN 1092-1 TYPE 12 PN16 SLIP ON BOSSED FLANGE

DN	D	C2	H1	R	N2	B1	d1	f1	K	L	No	Size
15	95	14	20	4	35	22	45	2	60	14	4	M12
20	105	14	24	4	45	27,5	58	2	65	14	4	M12
25	115	16	24	4	52	34,5	68	2	75	14	4	M12
32	140	16	26	6	60	43,5	78	2	85	14	4	M12
40	150	16	26	6	70	49,5	88	2	100	18	4	M16
50	165	18	28	6	84	61,5	102	2	110	18	4	M16
65	185	18	32	6	104	77,5	122	2	125	18	4	M16
80	200	20	34	8	118	90,5	138	2	145	18	8**	M16
100	220	20	40	8	140	116	158	2	160	18	8	M16
125	250	22	44	8	168	141,5	188	2	180	18	8	M16
150	285	22	44	10	195	170,5	212	2	210	18	8	M16
200	340	24	44	10	246	221,5	268	2	240	22	8	M20
250	405	26	46	12	298	276,5	320	2	295	22	12	M20
300	460	28	46	12	350	327,5	378	2	355	26	12	M24
350	520	30	57	12	400	359	438	2	410	26	12	M24
400	580	32	63	12	456	411,0	490	2	470	26	16	M24
450	640	40	68	12	502	462,0	550	2	525	30	16	M27
500	715	44	73	12	559	513,5	610	2	585	30	20	M27
600	840	54	83	12	658	616,5	725	2	650	33	20	M30
700	910	36	83	12	760	-	795	2	770	36	20	M33
800	1025	38	90	12	864	-	900	2	840	36	24	M33
900	1125	40	94	12	968	-	1000	2	950	39	24	M36
1000	1255	42	100	16	1072	-	1115	2	1050	39	28	M36
1200	1485	48	-	16	-	-	1330	2	1170	42	28	M39
1400	1685	52	-	16	-	-	1530	2	1390	48	32	M45
1600	1930	58	-	16	-	-	1750	2	1590	48	36	M45

EN 1092-1 TYPE 12 PN25 SLIP ON BOSSED FLANGE

DN	D	C2	H1	R	N2	B1	d1	f1	K	L	No	Size
10	90	14	20	4	30	18	40	2	mm	mm	-	mm
15	95	14	20	4	35	22	45	2	60	14	4	M12
20	105	14	24	4	45	27,5	58	2	65	14	4	M12
25	115	16	24	4	52	34,5	68	2	75	14	4	M12
32	140	16	26	6	60	43,5	78	2	85	14	4	M12
40	150	16	26	6	70	49,5	88	2	100	18	4	M16
50	165	20	34	6	84	61,5	102	2	110	18	4	M16
65	185	22	38	6	104	77,5	122	2	125	18	4	M16
80	200	24	40	8	118	90,5	138	2	145	18	8	M16
100	235	24	44	8	145	116	162	2	160	18	8	M16
125	270	26	48	10	170	141,5	188	2	190	22	8	M20
150	300	28	52	10	200	170,5	218	2	220	26	8	M24
200	360	30	52	10	256	221,5	278	2	250	26	8	M24
250	425	32	60	12	310	276,5	335	2	310	26	12	M24
300	485	34	67	12	364	327,5	395	2	370	30	12	M27
350	555	38	72	12	418	359,5	450	2	430	30	16	M27
400	620	40	78	12	472	411,0	505	2	490	33	16	M30
450	670	46	84	12	520	462,0	555	2	550	36	16	M33
500	730	48	90	12	580	513,5	615	2	600	36	20	M33
600	845	58	100	12	684	616,5	720	2	660	36	20	M33
700	960	46	-	12	-	-	820	2	770	39	20	M36
800	1085	50	-	12	-	-	930	2	875	42	24	M39
900	1185	54	-	12	-	-	1030	2	990	48	24	M45
1000	1320	58	-	16	-	-	1140	2	1090	48	28	M45
1200	1530	-	-	18	-	-	1350	2	1210	56	28	M52
1400	1755	-	-	18	-	-	1560	2	1420	56	32	M52
1600	1975	-	-	20	-	-	1780	2	1640	62	36	M56

EN 1092-1 TYPE 12 PN25 SLIP ON BOSSED FLANGE

DN	D	C2	H1	R	N2	B1	d1	f1	K	L	No	Size
10	90	14	20	4	30	18	40	2	mm	mm	-	mm
15	95	14	20	4	35	22	45	2	60	14	4	M12
20	105	14	24	4	45	27,5	58	2	65	14	4	M12
25	115	16	24	4	52	34,5	68	2	75	14	4	M12
32	140	16	26	6	60	43,5	78	2	85	14	4	M12
40	150	16	26	6	70	49,5	88	2	100	18	4	M16
50	165	20	34	6	84	61,5	102	2	110	18	4	M16
65	185	22	38	6	104	77,5	122	2	125	18	4	M16
80	200	24	40	8	118	90,5	138	2	145	18	8	M16
100	235	24	44	8	145	116	162	2	160	18	8	M16
125	270	26	48	10	170	141,5	188	2	190	22	8	M20
150	300	28	52	10	200	170,5	218	2	220	26	8	M24
200	375	34	52	10	260	221,5	285	2	250	26	8	M24
250	450	38	60	12	312	276,5	345	2	320	30	12	M27
300	515	42	67	12	380	327,5	410	2	385	33	12	M30
350	580	46	72	12	424	359,5	465	2	450	33	16	M30
400	660	50	78	12	478	411,0	535	2	510	36	16	M33
450	685	57	84	12	522	462,0	560	2	585	39	16	M36
500	755	57	90	12	576	513,5	615	2	610	39	20	M36
600	890	72	100	12	686	616,5	735	2	670	42	20	M39

Use these tables for RFQ preparation. Final production should be confirmed against the required standard edition, drawing, material grade and certificate requirement.

Send this product for quotation

EN 1092-1 Type 12 Slip-on Bossed Flanges RFQ support

Send the standard, DN size, PN rating, material grade, facing, quantity, certificate requirement and any project drawing. Hyupshin will check the specification before quotation.

Send Inquiry

RFQ preparation

Send standard, type, size, pressure, material and certificate requirements.

Contact sales