Type-driven quotation
Regular requests include Type 01 plate, Type 05 blind, Type 11 weld neck and Type 12 slip-on bossed flanges. Type 02 and Type 13 can be reviewed where the project specification requires them.
Main product range
EN 1092-1 flange supply for European buyers.
EN 1092-1 is the main European range for Hyupshin. Buyers can send type, PN rating, material and certificate requirements for Type 01, 02, 05, 11, 12 and 13 flanges.
EN 1092-1 focused
ASME B16.5 supported
PN-rated supply
Traceable documents
EN 1092-1Main product range
ANSI B16.5Class-rated American standard
PED / AD 2000 / UKCACertificate references
Importers & stockistsRepeat supply cooperation
European shipment markets
Flange supply support for European importers and distributors.
Hyupshin supports EN 1092-1, DIN, BS 4504, UNI and project-standard flange inquiries for buyers in United Kingdom, Germany, Hungary, Poland, Czech Republic, Croatia, Italy, Serbia, Slovakia, France, Norway, Portugal, Spain, Netherlands, Austria, Ireland, Albania, Bulgaria, Belgium, Greece.
RFQ preparation
Information that makes European standard flange quotation faster.
Standard
EN 1092-1, ANSI / ASME B16.5, DIN, BS 4504, UNI or project drawing.
Flange details
Type, DN size, PN rating, facing, bore and drawing notes.
Material
Carbon steel, low-temperature steel, stainless steel or project grade.
Documents
EN 10204 3.1, inspection, marking, packing and certificate needs.
Focused pages
Related European flange pages
EN 1092-1 Type 02 Loose Flanges
EN 1092-1 Type 02 loose flange dimensions and RFQ notes for purchasing review.
EN 1092-1 Type 05 Blind FlangesEN 1092-1 Type 05 blind flange dimensions and RFQ notes for purchasing review.
EN 1092-1 Type 12 Slip-on Bossed FlangesEN 1092-1 Type 12 slip-on bossed flange dimensions and RFQ notes for purchasing review.
EN 1092-1 Type 13 Threaded FlangesEN 1092-1 Type 13 threaded flange dimensions and RFQ notes for purchasing review.
EN 1092-1 Type 01 Plate FlangePlate flange dimensions and RFQ notes.
EN 1092-1 Type 11 Weld Neck FlangeWeld neck flange dimensions and RFQ notes.
EN 1092-1 PN16 FlangeCommon PN16 quotation page.
Supply notes
EN 1092-1 flange supply for European buyers. for European buyers
PN ratings and material control
PN6, PN10, PN16, PN25 and PN40 inquiries can be checked against material grade, face type, drawing notes and certificate requirements before production or sourcing confirmation.
RFQ notes
Please confirm standard, flange type, nominal size, PN rating, material grade, face type, quantity, certificate requirement and destination port when sending an inquiry.
Dimension confirmation
For EN 1092-1 orders, confirm DN size, PN rating, flange type, facing, bore and whether any attached drawing overrides standard dimensions.
European buyer focus
Order details to confirm before production
EN 1092-1 flange inquiries are reviewed by standard, pressure rating and project use.
State PN rating clearly, especially PN10, PN16, PN25 or PN40 for regular European distributor orders.
Common RFQs include carbon steel, low-temperature steel and stainless steel grades. Attach the project grade when it differs from regular stock items.
Confirm RF, FF, RTJ, galvanized finish, black paint, anti-rust oil or project-specific surface protection before quotation.
Mention EN 10204 3.1, PED, AD 2000, UKCA, PMI, NDT or third-party inspection requirements in the RFQ.
For European shipment, state pallet, wooden case, label, marking and mixed-size packing requirements early.
Procurement guidance
EN 1092-1 flange supply for European buyers. quotation notes
EN 1092-1 flange supply for European buyers. buying notes
EN 1092-1 flange orders are usually compared by type number, DN size, PN rating, material grade and facing. European buyers often need a practical quotation format that separates Type 01 plate flanges, Type 05 blind flanges, Type 11 weld neck flanges and other type numbers instead of mixing them into one unclear line item.
For distributor stock and repeat purchasing, PN10 and PN16 are common, while PN25, PN40 and higher ratings are usually reviewed as project requirements. A useful RFQ should state whether the order is for stock replenishment, plant maintenance, a pressure piping project or a drawing-based replacement item.
Flange detail review
For this flange type, the safest quotation route is to send the standard, size range, pressure rating, material grade, facing, quantity and any drawing notes together in one RFQ. This gives the sales and technical team enough information to check the order before pricing.
For European buyers, the quotation is stronger when documentation requirements are stated at the beginning: EN 10204 3.1 certificate, PED or AD 2000 references, UKCA notes, third-party inspection, PMI, NDT, marking photos or packing photos. This avoids revising the price after the technical review.
How to prepare the RFQ
Hyupshin recommends sending the RFQ as a table when several sizes are involved. Separate each standard, type, pressure rating and material grade into its own line, then add quantity, destination port and required delivery time. This format is easier for European importers, distributors and project suppliers to compare and repeat in future orders.
If the order is urgent, mark which sizes are needed first and whether partial shipment is acceptable. For repeat distributors, previous purchase records or customer part numbers can be added to the message field so the specification can be matched more quickly.
Reference scope
Common order references
| Standard / Type | Product | Typical scope |
|---|---|---|
| Type 01 | Plate flange | PN6 / PN10 / PN16 / PN25 / PN40 |
| Type 05 | Blind flange | PN6 / PN10 / PN16 / PN25 / PN40 |
| Type 11 | Weld neck flange | PN6 / PN10 / PN16 / PN25 / PN40 |
| Type 12 | Slip-on bossed flange | PN10 / PN16 / PN25 / PN40 |
| Type 13 | Threaded flange | Project-based supply |
| PN range | Common pressure classes | PN6 / PN10 / PN16 / PN25 / PN40, with PN63 and PN100 reviewed by drawing and project specification |
Dimensions reference
EN 1092-1 PN16 common drilling dimensions
| DN | Flange OD D mm | PCD K mm | Bolt holes | Hole dia. mm | Nominal thickness mm |
|---|---|---|---|---|---|
| DN15 | 95 | 65 | 4 | 14 | 14 |
| DN20 | 105 | 75 | 4 | 14 | 16 |
| DN25 | 115 | 85 | 4 | 14 | 16 |
| DN32 | 140 | 100 | 4 | 18 | 16 |
| DN40 | 150 | 110 | 4 | 18 | 16 |
| DN50 | 165 | 125 | 4 | 18 | 18 |
| DN65 | 185 | 145 | 4 | 18 | 18 |
| DN80 | 200 | 160 | 8 | 18 | 20 |
| DN100 | 220 | 180 | 8 | 18 | 20 |
| DN125 | 250 | 210 | 8 | 18 | 22 |
| DN150 | 285 | 240 | 8 | 22 | 22 |
| DN200 | 340 | 295 | 12 | 22 | 24 |
| DN250 | 405 | 355 | 12 | 26 | 26 |
| DN300 | 460 | 410 | 12 | 26 | 28 |
Reference values for quotation review only. Final production dimensions, facing and tolerance should be confirmed against the required EN 1092-1 edition, flange type, material and project drawing.
Send this product for quotation
Send Inquiry
EN 1092-1 flange supply for European buyers. RFQ support
Send the standard, DN size, PN rating, material grade, facing, quantity, certificate requirement and any project drawing. Hyupshin will check the specification before quotation.
Buyer questions
RFQ and order notes
Which EN 1092-1 types are most commonly requested?
Type 01 plate flanges, Type 05 blind flanges and Type 11 weld neck flanges are common RFQ items. Type 12 and Type 13 can also be reviewed according to order details.
What information is needed for a clear EN 1092-1 quote?
Please provide type, DN size, PN rating, material grade, facing, quantity, certificate requirement and destination port.
RFQ preparation
Contact sales