Product scope
UNI 6092 blind flange can be quoted in carbon steel, stainless steel or project material grades when the order specification, dimensions and certificate requirements are confirmed.
UNI detail
UNI 6092 Blind Flanges
UNI 6092 blind flange dimensions for Italian standard project review.
EN 1092-1 focused
ASME B16.5 supported
PN-rated supply
Traceable documents
EN 1092-1Main product range
ANSI B16.5Class-rated American standard
PED / AD 2000 / UKCACertificate references
Importers & stockistsRepeat supply cooperation
European shipment markets
Flange supply support for European importers and distributors.
Hyupshin supports EN 1092-1, DIN, BS 4504, UNI and project-standard flange inquiries for buyers in United Kingdom, Germany, Hungary, Poland, Czech Republic, Croatia, Italy, Serbia, Slovakia, France, Norway, Portugal, Spain, Netherlands, Austria, Ireland, Albania, Bulgaria, Belgium, Greece.
RFQ preparation
Information that makes European standard flange quotation faster.
Standard
EN 1092-1, ANSI / ASME B16.5, DIN, BS 4504, UNI or project drawing.
Flange details
Type, DN size, PN rating, facing, bore and drawing notes.
Material
Carbon steel, low-temperature steel, stainless steel or project grade.
Documents
EN 10204 3.1, inspection, marking, packing and certificate needs.
Supply notes
UNI 6092 Blind Flanges for European buyers
RFQ confirmation points
Please confirm standard number, DN size, pressure rating, material grade, facing, quantity, certificate requirement and any project drawing before quotation.
European buyer focus
Order details to confirm before production
Blind flange inquiries are reviewed against piping service, installation position and required facing.
State PN rating clearly, especially PN10, PN16, PN25 or PN40 for regular European distributor orders.
Common RFQs include carbon steel, low-temperature steel and stainless steel grades. Attach the project grade when it differs from regular stock items.
Confirm RF, FF, RTJ, galvanized finish, black paint, anti-rust oil or project-specific surface protection before quotation.
Mention EN 10204 3.1, PED, AD 2000, UKCA, PMI, NDT or third-party inspection requirements in the RFQ.
For European shipment, state pallet, wooden case, label, marking and mixed-size packing requirements early.
Procurement guidance
UNI 6092 Blind Flanges quotation notes
UNI 6092 Blind Flanges buying notes
UNI flange pages support Italian standard references used in distributor stock, maintenance work and regional European projects. Plate flanges under UNI 2276, 2277 and 2278 and weld neck flanges under UNI 2280-2284 should be quoted with the exact UNI number rather than only a general description.
Italian and nearby European buyers often care about dimensional matching, material certificate, finish and repeat availability. The RFQ should include the UNI series, DN size, PN rating, material and whether the flanges are for stock or a named project.
Blind flange details
For blind flanges, facing, thickness, pressure rating and marking are important because the flange is used for closing pipe ends, valves or pressure equipment connections. Certificate and inspection requirements should be listed before production.
For European buyers, the quotation is stronger when documentation requirements are stated at the beginning: EN 10204 3.1 certificate, PED or AD 2000 references, UKCA notes, third-party inspection, PMI, NDT, marking photos or packing photos. This avoids revising the price after the technical review.
How to prepare the RFQ
Hyupshin recommends sending the RFQ as a table when several sizes are involved. Separate each standard, type, pressure rating and material grade into its own line, then add quantity, destination port and required delivery time. This format is easier for European importers, distributors and project suppliers to compare and repeat in future orders.
If the order is urgent, mark which sizes are needed first and whether partial shipment is acceptable. For repeat distributors, previous purchase records or customer part numbers can be added to the message field so the specification can be matched more quickly.
Reference scope
Common order references
| Standard / Type | Product | Typical scope |
|---|---|---|
| UNI 6092 blind flange | Product type | Dimensions and specification tables below |
| Documents | Material certificate | EN 10204 3.1 by request |
| Order control | Drawing / standard edition | Confirm before production |
Product data
Dimensions and specification tables
ITALY STANDARD UNI 6092 PN10 BLIND FLANGE DIMENSIONS TABLE
| Rated Diameter | a | b | D | f | Number of holes | Threading of the screws | Weight* in Kg |
|---|---|---|---|---|---|---|---|
| 15 | 65 | 14 | 95 | 14 | 4 | M 12 | 0,71 |
| 20 | 75 | 16 | 105 | 14 | 4 | M 12 | 1,01 |
| 25 | 85 | 16 | 115 | 14 | 4 | M 12 | 1,22 |
| 32 | 100 | 16 | 140 | 18 | 4 | M 16 | 1,80 |
| 40 | 110 | 16 | 150 | 18 | 4 | M 16 | 2,09 |
| 50 | 125 | 18 | 165 | 18 | 4 | M 16 | 2,87 |
| 65 | 145 | 18 | 185 | 18 | 4 | M 16 | 3,65 |
| 80 | 160 | 20 | 200 | 18 | 4 | M 16 | 4,61 |
| 100 | 180 | 20 | 220 | 18 | 8 | M 16 | 5,65 |
| 125 | 210 | 22 | 250 | 18 | 8 | M 16 | 8,12 |
| 150 | 240 | 22 | 285 | 22 | 8 | M 20 | 10,5 |
| 175 | 270 | 24 | 315 | 22 | 8 | M 20 | 14,1 |
| 200 | 295 | 24 | 340 | 22 | 8 | M 20 | 16,5 |
| 250 | 350 | 26 | 395 | 22 | 12 | M 20 | 24,1 |
| 300 | 400 | 26 | 445 | 22 | 12 | M 20 | 30,8 |
| 350 | 460 | 26 | 505 | 22 | 16 | M 20 | 39,6 |
| 400 | 515 | 26 | 565 | 25 | 16 | M 22 | 49,6 |
| 450 | 565 | 26 | 615 | 25 | 20 | M 22 | 58,6 |
| 500 | 620 | 28 | 670 | 25 | 20 | M 22 | 75,3 |
| * | The weight is approximate and calculated on base 7.85 Kg/dm3 |
Use these tables for RFQ preparation. Final production should be confirmed against the required standard edition, drawing, material grade and certificate requirement.
Send this product for quotation
Send Inquiry
UNI 6092 Blind Flanges RFQ support
Send the standard, DN size, PN rating, material grade, facing, quantity, certificate requirement and any project drawing. Hyupshin will check the specification before quotation.
RFQ preparation
Contact sales