PN16 quotation scope
PN16 inquiries may include Type 01 plate, Type 05 blind, Type 11 weld neck, Type 12 slip-on bossed and other EN 1092-1 flange types.
Common pressure rating page
EN 1092-1 PN16 Flanges
PN16 is one of the most common European flange inquiry ratings. Buyers use this page when they need EN 1092-1 PN16 plate, blind, weld neck, loose or slip-on bossed flanges.
EN 1092-1 focused
ASME B16.5 supported
PN-rated supply
Traceable documents
EN 1092-1Main product range
ANSI B16.5Class-rated American standard
PED / AD 2000 / UKCACertificate references
Importers & stockistsRepeat supply cooperation
European shipment markets
Flange supply support for European importers and distributors.
Hyupshin supports EN 1092-1, DIN, BS 4504, UNI and project-standard flange inquiries for buyers in United Kingdom, Germany, Hungary, Poland, Czech Republic, Croatia, Italy, Serbia, Slovakia, France, Norway, Portugal, Spain, Netherlands, Austria, Ireland, Albania, Bulgaria, Belgium, Greece.
RFQ preparation
Information that makes European standard flange quotation faster.
Standard
EN 1092-1, ANSI / ASME B16.5, DIN, BS 4504, UNI or project drawing.
Flange details
Type, DN size, PN rating, facing, bore and drawing notes.
Material
Carbon steel, low-temperature steel, stainless steel or project grade.
Documents
EN 10204 3.1, inspection, marking, packing and certificate needs.
Focused pages
Related European flange pages
Supply notes
EN 1092-1 PN16 Flanges for European buyers
Stockist and distributor notes
For regular PN16 demand, provide size range, monthly or annual quantity, preferred material grade and packaging requirement.
Common PN16 size review
The table below helps buyers check common DN15-DN300 PN16 drilling references before sending an RFQ. Larger sizes, different PN ratings and drawing-based orders should be confirmed separately.
European buyer focus
Order details to confirm before production
Weld Neck flange inquiries are reviewed against piping service, installation position and required facing.
State PN rating clearly, especially PN10, PN16, PN25 or PN40 for regular European distributor orders.
Common RFQs include carbon steel, low-temperature steel and stainless steel grades. Attach the project grade when it differs from regular stock items.
Confirm RF, FF, RTJ, galvanized finish, black paint, anti-rust oil or project-specific surface protection before quotation.
Mention EN 10204 3.1, PED, AD 2000, UKCA, PMI, NDT or third-party inspection requirements in the RFQ.
For European shipment, state pallet, wooden case, label, marking and mixed-size packing requirements early.
Procurement guidance
EN 1092-1 PN16 Flanges quotation notes
EN 1092-1 PN16 Flanges buying notes
EN 1092-1 flange orders are usually compared by type number, DN size, PN rating, material grade and facing. European buyers often need a practical quotation format that separates Type 01 plate flanges, Type 05 blind flanges, Type 11 weld neck flanges and other type numbers instead of mixing them into one unclear line item.
For distributor stock and repeat purchasing, PN10 and PN16 are common, while PN25, PN40 and higher ratings are usually reviewed as project requirements. A useful RFQ should state whether the order is for stock replenishment, plant maintenance, a pressure piping project or a drawing-based replacement item.
Weld Neck flange details
For weld neck flanges, the bore, pipe schedule, welding neck dimensions and pressure service should be stated clearly. These details affect machining and inspection, especially when the buyer needs WNRF, WNFF or RTJ execution.
For European buyers, the quotation is stronger when documentation requirements are stated at the beginning: EN 10204 3.1 certificate, PED or AD 2000 references, UKCA notes, third-party inspection, PMI, NDT, marking photos or packing photos. This avoids revising the price after the technical review.
How to prepare the RFQ
Hyupshin recommends sending the RFQ as a table when several sizes are involved. Separate each standard, type, pressure rating and material grade into its own line, then add quantity, destination port and required delivery time. This format is easier for European importers, distributors and project suppliers to compare and repeat in future orders.
If the order is urgent, mark which sizes are needed first and whether partial shipment is acceptable. For repeat distributors, previous purchase records or customer part numbers can be added to the message field so the specification can be matched more quickly.
Reference scope
Common order references
| Standard / Type | Product | Typical scope |
|---|---|---|
| PN16 Type 01 | Plate flange | Common stock / project demand |
| PN16 Type 05 | Blind flange | Project and maintenance supply |
| PN16 Type 11 | Weld neck flange | Pressure piping projects |
| PN16 Type 12 | Slip-on bossed flange | By inquiry |
Dimensions reference
EN 1092-1 PN16 common drilling dimensions
| DN | Flange OD D mm | PCD K mm | Bolt holes | Hole dia. mm | Nominal thickness mm |
|---|---|---|---|---|---|
| DN15 | 95 | 65 | 4 | 14 | 14 |
| DN20 | 105 | 75 | 4 | 14 | 16 |
| DN25 | 115 | 85 | 4 | 14 | 16 |
| DN32 | 140 | 100 | 4 | 18 | 16 |
| DN40 | 150 | 110 | 4 | 18 | 16 |
| DN50 | 165 | 125 | 4 | 18 | 18 |
| DN65 | 185 | 145 | 4 | 18 | 18 |
| DN80 | 200 | 160 | 8 | 18 | 20 |
| DN100 | 220 | 180 | 8 | 18 | 20 |
| DN125 | 250 | 210 | 8 | 18 | 22 |
| DN150 | 285 | 240 | 8 | 22 | 22 |
| DN200 | 340 | 295 | 12 | 22 | 24 |
| DN250 | 405 | 355 | 12 | 26 | 26 |
| DN300 | 460 | 410 | 12 | 26 | 28 |
Reference values for quotation review only. Final production dimensions, facing and tolerance should be confirmed against the required EN 1092-1 edition, flange type, material and project drawing.
Send this product for quotation
Send Inquiry
EN 1092-1 PN16 Flanges RFQ support
Send the standard, DN size, PN rating, material grade, facing, quantity, certificate requirement and any project drawing. Hyupshin will check the specification before quotation.
Buyer questions
RFQ and order notes
Which PN16 flange types can be quoted?
Common PN16 requests include Type 01, Type 05, Type 11 and Type 12. Other types can be reviewed with drawing or specification.
RFQ preparation
Contact sales