Attekintes europai beszerzeshez
A EN 1092-1 ajanlatkereseket szabvanykiadas, karima tipus, nyomasfokozat, anyag, tomitofelulet, mennyiseg es dokumentumigeny szerint vizsgaljuk.
EN 1092-1 - europai szallitas
EN 1092-1 karimak europai vevoknek
Gyakorlati referencia europai vevoknek, akik EN 1092-1 ajanlatkerest keszitenek szabvannyal, tipussal, merettel, nyomassal, anyaggal es tanusitvannyal.
EN 1092-1
ASME B16.5
PN szallitas
Kovetheto dokumentumok
EN 1092-1Main product range
ANSI B16.5Class-rated American standard
PED / AD 2000 / UKCACertificate references
Importers & stockistsRepeat supply cooperation
Supply notes
EN 1092-1 karimak europai vevoknek for European buyers
Gyartas elotti adatok
Ajanlat elott erositse meg a meretet, nyomast, anyagot, tomitofeluletet, jelolest, csomagolast, rendeltetesi helyet es a csatolt rajzot.
Reference scope
Common order references
| Standard / Type | Product | Typical scope |
|---|---|---|
| Type 01 | Plate flange | PN6 / PN10 / PN16 / PN25 / PN40 |
| Type 05 | Blind flange | PN6 / PN10 / PN16 / PN25 / PN40 |
| Type 11 | Weld neck flange | PN6 / PN10 / PN16 / PN25 / PN40 |
| Type 12 | Slip-on bossed flange | PN10 / PN16 / PN25 / PN40 |
| Type 13 | Threaded flange | Project-based supply |
| PN range | Common pressure classes | PN6 / PN10 / PN16 / PN25 / PN40, with PN63 and PN100 reviewed by drawing and project specification |
Dimensions reference
EN 1092-1 PN16 common drilling dimensions
| DN | Flange OD D mm | PCD K mm | Bolt holes | Hole dia. mm | Nominal thickness mm |
|---|---|---|---|---|---|
| DN15 | 95 | 65 | 4 | 14 | 14 |
| DN20 | 105 | 75 | 4 | 14 | 16 |
| DN25 | 115 | 85 | 4 | 14 | 16 |
| DN32 | 140 | 100 | 4 | 18 | 16 |
| DN40 | 150 | 110 | 4 | 18 | 16 |
| DN50 | 165 | 125 | 4 | 18 | 18 |
| DN65 | 185 | 145 | 4 | 18 | 18 |
| DN80 | 200 | 160 | 8 | 18 | 20 |
| DN100 | 220 | 180 | 8 | 18 | 20 |
| DN125 | 250 | 210 | 8 | 18 | 22 |
| DN150 | 285 | 240 | 8 | 22 | 22 |
| DN200 | 340 | 295 | 12 | 22 | 24 |
| DN250 | 405 | 355 | 12 | 26 | 26 |
| DN300 | 460 | 410 | 12 | 26 | 28 |
Reference values for quotation review only. Final production dimensions, facing and tolerance should be confirmed against the required EN 1092-1 edition, flange type, material and project drawing.
Ajanlatkeres kuldese
Ajanlatkeres kuldese
EN 1092-1 karimak europai vevoknek RFQ support
Ajanlatkeres kuldese: szabvany, type, size, pressure rating, anyag, quantity, tanusitvany and any rajz.
Buyer questions
RFQ and order notes
Milyen adatok kellenek az ajanlathoz?
Kuldje el a szabvanyt, tipust, meretet, nyomast, anyagot, mennyiseget, rendeltetesi helyet es tanusitvany igenyt.
A Hyupshin tud rajz szerinti rendelest ellenorizni?
Igen. A rajzok vagy korabbi rendelesek segitenek a meretek, furatok es tures ellenorzeseben.
RFQ elokeszites
Ertekesites kapcsolat