Tipi EN 1092-1 richiesti
La gamma include Type 01 plate, Type 02 loose, Type 05 blind, Type 11 weld neck, Type 12 slip-on bossed e Type 13 threaded.
Norma principale EN 1092-1
Flange EN 1092-1 per fornitura europea
Riferimento per buyer che preparano RFQ EN 1092-1 con tipo di flangia, DN, PN, materiale, facing e certificati.
EN 1092-1
ASME B16.5
Fornitura PN
Documenti tracciabili
EN 1092-1Main product range
ANSI B16.5Class-rated American standard
PED / AD 2000 / UKCACertificate references
Importers & stockistsRepeat supply cooperation
Supply notes
Flange EN 1092-1 per fornitura europea for European buyers
Conferme prima della produzione
Confermare DN, PN, materiale, facing, tolleranze, marcatura, imballo e certificato prima del rilascio produzione.
Reference scope
Common order references
| Standard / Type | Product | Typical scope |
|---|---|---|
| Type 01 | Plate flange | PN6 / PN10 / PN16 / PN25 / PN40 |
| Type 05 | Blind flange | PN6 / PN10 / PN16 / PN25 / PN40 |
| Type 11 | Weld neck flange | PN6 / PN10 / PN16 / PN25 / PN40 |
| Type 12 | Slip-on bossed flange | PN10 / PN16 / PN25 / PN40 |
| Type 13 | Threaded flange | Project-based supply |
| PN range | Common pressure classes | PN6 / PN10 / PN16 / PN25 / PN40, with PN63 and PN100 reviewed by drawing and project specification |
Dimensions reference
EN 1092-1 PN16 common drilling dimensions
| DN | Flange OD D mm | PCD K mm | Bolt holes | Hole dia. mm | Nominal thickness mm |
|---|---|---|---|---|---|
| DN15 | 95 | 65 | 4 | 14 | 14 |
| DN20 | 105 | 75 | 4 | 14 | 16 |
| DN25 | 115 | 85 | 4 | 14 | 16 |
| DN32 | 140 | 100 | 4 | 18 | 16 |
| DN40 | 150 | 110 | 4 | 18 | 16 |
| DN50 | 165 | 125 | 4 | 18 | 18 |
| DN65 | 185 | 145 | 4 | 18 | 18 |
| DN80 | 200 | 160 | 8 | 18 | 20 |
| DN100 | 220 | 180 | 8 | 18 | 20 |
| DN125 | 250 | 210 | 8 | 18 | 22 |
| DN150 | 285 | 240 | 8 | 22 | 22 |
| DN200 | 340 | 295 | 12 | 22 | 24 |
| DN250 | 405 | 355 | 12 | 26 | 26 |
| DN300 | 460 | 410 | 12 | 26 | 28 |
Reference values for quotation review only. Final production dimensions, facing and tolerance should be confirmed against the required EN 1092-1 edition, flange type, material and project drawing.
Send this product for quotation
Invia richiesta
Flange EN 1092-1 per fornitura europea RFQ support
Send the standard, DN size, PN rating, material grade, facing, quantity, certificate requirement and any project drawing. Hyupshin will check the specification before quotation.
Buyer questions
RFQ and order notes
Che dati servono per una RFQ EN 1092-1?
Tipo, DN, PN, materiale, faccia FF/RF, quantita, certificato e destinazione. Allegare il disegno se disponibile.
Le tabelle dimensionali sono definitive?
Le tabelle aiutano la RFQ. La produzione finale deve essere confermata secondo norma, disegno e richiesta cliente.
Preparazione RFQ
Contatta vendite