Tipos EN 1092-1 comuns
A gama inclui Type 01 plate, Type 02 loose, Type 05 blind, Type 11 weld neck, Type 12 slip-on bossed e Type 13 threaded conforme a pressao e o desenho.
Norma principal EN 1092-1
Flanges EN 1092-1 para fornecimento europeu
Referencia para compradores que preparam RFQs EN 1092-1 com tipo de flange, DN, PN, material, face de vedacao e certificado.
EN 1092-1
ASME B16.5
Fornecimento PN
Documentos rastreaveis
EN 1092-1Main product range
ANSI B16.5Class-rated American standard
PED / AD 2000 / UKCACertificate references
Importers & stockistsRepeat supply cooperation
Supply notes
Flanges EN 1092-1 para fornecimento europeu for European buyers
Confirmacao antes da producao
Confirme DN, PN, material, facing, tolerancia, marcacao, embalagem e certificado antes de liberar a producao.
Reference scope
Common order references
| Standard / Type | Product | Typical scope |
|---|---|---|
| Type 01 | Plate flange | PN6 / PN10 / PN16 / PN25 / PN40 |
| Type 05 | Blind flange | PN6 / PN10 / PN16 / PN25 / PN40 |
| Type 11 | Weld neck flange | PN6 / PN10 / PN16 / PN25 / PN40 |
| Type 12 | Slip-on bossed flange | PN10 / PN16 / PN25 / PN40 |
| Type 13 | Threaded flange | Project-based supply |
| PN range | Common pressure classes | PN6 / PN10 / PN16 / PN25 / PN40, with PN63 and PN100 reviewed by drawing and project specification |
Dimensions reference
EN 1092-1 PN16 common drilling dimensions
| DN | Flange OD D mm | PCD K mm | Bolt holes | Hole dia. mm | Nominal thickness mm |
|---|---|---|---|---|---|
| DN15 | 95 | 65 | 4 | 14 | 14 |
| DN20 | 105 | 75 | 4 | 14 | 16 |
| DN25 | 115 | 85 | 4 | 14 | 16 |
| DN32 | 140 | 100 | 4 | 18 | 16 |
| DN40 | 150 | 110 | 4 | 18 | 16 |
| DN50 | 165 | 125 | 4 | 18 | 18 |
| DN65 | 185 | 145 | 4 | 18 | 18 |
| DN80 | 200 | 160 | 8 | 18 | 20 |
| DN100 | 220 | 180 | 8 | 18 | 20 |
| DN125 | 250 | 210 | 8 | 18 | 22 |
| DN150 | 285 | 240 | 8 | 22 | 22 |
| DN200 | 340 | 295 | 12 | 22 | 24 |
| DN250 | 405 | 355 | 12 | 26 | 26 |
| DN300 | 460 | 410 | 12 | 26 | 28 |
Reference values for quotation review only. Final production dimensions, facing and tolerance should be confirmed against the required EN 1092-1 edition, flange type, material and project drawing.
Send this product for quotation
Enviar consulta
Flanges EN 1092-1 para fornecimento europeu RFQ support
Send the standard, DN size, PN rating, material grade, facing, quantity, certificate requirement and any project drawing. Hyupshin will check the specification before quotation.
Buyer questions
RFQ and order notes
Que informacao e necessaria para uma RFQ EN 1092-1?
Informe tipo, DN, PN, material, face FF/RF, quantidade, certificado e destino. Anexe desenho se houver requisito especial.
As tabelas de dimensoes sao finais?
As tabelas ajudam a preparar a RFQ. A producao final deve seguir a edicao da norma, desenho e requisito do comprador.
Preparacao de RFQ
Contatar vendas